The Kit ɗin ban ruwa na SeeSa micro sprayer shine ƙwaƙƙwal, duk-in-daya maganin shayarwa ta atomatik wanda aka tsara don lambunan gida, baranda, lambunan kayan lambu, da gadajen fure . Ya fito waje don ƙarancin amfani da ruwa, shigarwa mara ƙarfi, da daidaituwa mai faɗi . Lokacin da aka haɗa shi da bawul ɗin mai ƙidayar lokaci na ruwa, tsarin yana ba da ban ruwa na atomatik, daidaitaccen warware matsalolin aikin lambu na gama gari kamar shayar da ruwa mai cin lokaci, rarraba ruwa mara kyau, da tsire-tsire marasa kulawa yayin balaguron balaguro ko aiki.
1. Pre-Shiri Shiri
Tsare-tsare mai kyau kafin shigar da shi yana guje wa sake yin aiki, zubar ruwa, da ban ruwa mara kyau daga baya. Kuna buƙatar ƴan mintuna kaɗan kawai don kammala waɗannan matakai uku masu zuwa.
Kafin shigarwa, duba duk bututu, nozzles, da masu haɗawa don tsagewa, lalacewa, ko ɓangarori da suka ɓace.
1.2 Shafin Kimiyya & Tsare Tsare-tsare
Zaɓi tsayayyiyar famfo na gida a matsayin tushen ruwa kuma a tanadi isasshen sarari don tsaftacewa da kula da tacewa daga baya.
• Rarraba sararin ku zuwa yankunan ban ruwa masu zaman kansu: shuke-shuken baranda, filayen lambu, filayen kayan lambu, da wuraren furanni.
• Shirya bututun tare da gefuna gadajen fure, kusurwoyin bango, da hanyoyin lambu; guje wa wuraren da aka tako akai-akai da tushen shuka.
• Tazarar bututun ƙarfe mai ma'ana: 1-2m don atomizing nozzles, 2-3m don bututun rotary. A kiyaye 30%-50% mai ruɓani na feshi don kawar da matattun wuraren ban ruwa.
1.3 Ainihin Pre-Check
• Rufe zaren bututun famfo da Teflon tef don hana zubar ruwa.
• Ruwan ruwa na gida na al'ada (0.15-0.3MPa) ya isa; shigar da ƙaramin famfo mai ƙarfafawa idan matsa lamba na ruwa ya yi ƙasa sosai.
• Cire duwatsu, ciyawa, da abubuwa masu kaifi tare da hanyar bututun don guje wa huda bututun PE.
2. Jagorar Shigar Mataki-by-Mataki
Wannan ƙaramin kayan aikin ban ruwa na feshi yana ɗaukar ƙirar toshe cikin sauri , babu kayan aikin ƙwararru, babu walƙiya, kuma babu ƙwarewar da ake buƙata. Masu farawa zasu iya kammala dukkan shigarwa cikin mintuna 15 zuwa 30.
Mataki 1: Haɗa Tushen Ruwa da Kariyar Gaba
1. Shigar da haɗin kai mai sauri da ƙarfi akan famfon gida.
2. Haɗa sassa a daidaitaccen tsari: Faucet → Filter → Valve Control → Mai ƙidayar ruwa.
3. Shigar da tace bisa ga kibiya ta hanyar ruwa. Tacewar layin layi yadda ya kamata yana toshe yashi, laka, da datti don kare nozzles da bututun daga toshewa da tsawaita rayuwar sabis na tsarin.
Mataki na 2: Lay Main Hose da Bututun Reshe
1. Sanya babban bututun PE bayan hanyar da aka tsara.
2. Gyara bututun kowane mita 1-1.5 tare da turakun ƙasa don hana ƙaura ta hanyar iska ko takowa.
3. Yanke bututun zuwa tsayin da ake buƙata kuma yi amfani da tees da gwiwar hannu don raba bututun reshe don yankunan ban ruwa daban-daban.
4. Don lambuna na waje, binne bututun 10-15cm a ƙarƙashin ƙasa; a yankunan arewa masu sanyi, binne sama da 30cm don kariya daga sanyi da rigakafin tsufa.
• Tsire-tsire masu tukwane na baranda : Sanya drippers kusa da tushen shuka don guje wa fantsama ruwa a ƙasa.
• Lambun lawn & lambunan kayan lambu : Daidaita nozzles zuwa feshin kwance a kwance, guje wa fesa bango, hanyoyi, da kayan waje.
• Gadajen fure : Daidaita tsayin bututun ƙarfe don tabbatar da hazo mai laushi ya rufe tsire-tsire a hankali ba tare da lalata ganye ko wanke ƙasa ba.
Mataki 4: Gwajin Ruwa & Gyaran Tsarin
1. Kunna tushen ruwa kuma gudanar da tsarin na tsawon mintuna 5 don shayar da iska da sauran datti a cikin bututun.
2. Bincika a hankali duk haɗin gwiwa, bututu, da bututun ruwa don zubar ruwa.
3. Daidaita kusurwoyin bututun ƙarfe don cimma ɗaukar nauyin ban ruwa iri ɗaya.
4. Tsaftace toshe nozzles tare da ruwan gudu ko kuma kwance ƙananan ramuka a hankali tare da lallausan allura.
3. Amfanin Kimiyya & Saitunan Ban ruwa
Madaidaicin lokaci da halaye na shayarwa suna shafar haɓakar shuka kai tsaye da ingancin ceton ruwa.
3.1 Mafi kyawun Lokacin Ruwa & Tsawon Lokaci
• Lokacin da aka ba da shawarar : 6:00-8:00 na safe ko 18:00-20:00 na yamma
• A guji shayar da tsakar rana a ƙarƙashin zafi mai zafi don rage ƙawancen ruwa da haɗarin ƙonewar ganye.
Tsawon lokacin shayarwa :
• Balcony potted shuke-shuke: 8-15 minti
• Lambun lawn: 20-30 mintuna
• lambun kayan lambu: 15-20 mintuna
• Succulents da tsire-tsire masu tsayayya da fari: 5-8 mintuna
Mitar ban ruwa :
• Yanayin zafi na bazara: sau ɗaya kowace rana
• bazara & kaka: Kowane kwanaki 2-3
Lokacin hutun hunturu: Kowane kwanaki 7-10 ko dakatar da shayarwa
• Ranakun ruwan sama: dakatar da ban ruwa da hannu ko amfani da firikwensin ruwan sama don kashewa ta atomatik
3.2 Yanayin Ban ruwa don yanayi daban-daban
• baranda : Yi amfani da ban ruwa mai ɗigo don madaidaicin tushen watering kuma kiyaye baranda mai tsabta.
• Yankin Lawn : Yi amfani da nozzles na jujjuyawar ƙarami don babba har ma da ɗaukar hoto.
• Lambun kayan lambu : Yi amfani da hazo mai laushi na atomizing don kare tsire-tsire masu tsire-tsire da hana ƙwayar ƙasa.
• Gadajen fure : Canja tsakanin micro spray da yanayin drip bisa ga tushen-tushen fure ko zurfin-tushen furanni.
3.3 Kurakurai gama gari don gujewa
• Yin watsi da daidaitaccen kusurwa na bututun ƙarfe na yau da kullun, yana haifar da rashin daidaituwar ruwa.
• Tsawon lokacin ban ruwa yana haifar da zubar ruwa da rubewar tushen.
• Gudun tsarin a ƙarƙashin hasken rana mai ƙarfi kai tsaye don guje wa ƙawancen sauri da tsufa na bututu.
• Yin watsi da matsananciyar ruwa wanda zai iya lalata bututu da bututun ruwa.
4. Kulawa ta yau da kullun & Nasihun Rayuwa
Tare da sauƙi da kulawa na yau da kullum, kayan aikin ban ruwa na micro na iya ɗaukar shekaru 3-5 a tsaye.
• Tsaftace allon tacewa da fesa nozzles kowane watanni 1-2; tsaftace akai-akai idan ruwan famfo ya ƙunshi babban laka.
• Bincika bututu, gidajen abinci, da bawuloli a kowace kakar; maye gurbin fashe ko ɓoyayyen sassa cikin lokaci.
• Kariyar sanyi na lokacin sanyi : A wuraren sanyi, cire duk sauran ruwa daga bututu gaba ɗaya, cire nozzles da tacewa, kuma adana su a cikin busasshen daki mai iska don hana daskarewa da fashewa.
• Lokacin da ba a amfani da shi na dogon lokaci, kashe wutar lantarki, zubar da bututun, da adana kayan haɗi da kyau.
5. FAQ - Tambayoyin da ake yawan yi
Q1: Wadanne tsire-tsire ne suka dace da kayan aikin ban ruwa na micro sprayer?
A: Ya dace da kusan dukkanin shuke-shuken aikin lambu na gida, gami da furen baranda, masu maye, lawns na lambu, shrubs, kayan lambu na gida, da gadaje na fure iri-iri. Yana goyan bayan nau'ikan feshin micro da drip ban ruwa.
Q2: Zan iya shigar da kayan ban ruwa da kaina ba tare da kayan aikin ƙwararru ba?
A: iya. Kit ɗin yana ɗaukar ƙirar fulogi mai sauri tare da cikakkun kayan haɗi. Babu kayan aikin ƙwararru ko ƙwarewa da ake buƙata. Hatta masu farawa zasu iya gama shigarwa cikin mintuna 30.
Q3: Zan iya gane cikakken watering ta atomatik tare da mai ƙidayar ruwa?
A: Lallai. Haɗa kayan aikin ban ruwa tare da mai ƙidayar ruwa, saita lokacin shayarwa, tsawon lokaci, da mita, kuma tsarin zai gudana ta atomatik. Yana da cikakke ga ma'aikata masu aiki da masu amfani waɗanda galibi ke tafiya daga gida.
Q4: Shin micro spray ban ruwa ceton ruwa? Nawa ne ruwa zai iya ajiyewa?
A: Micro spray ban ruwa yana isar da ruwa kai tsaye zuwa tushen shuka, yana rage evaporation da sharar gida. Adadin ceton ruwa zai iya kaiwa kashi 30% zuwa 50% idan aka kwatanta da shayar da bututun hannu na gargajiya.
Q5: Shin ƙananan nozzles suna da sauƙin toshewa? Yadda za a warware clogging?
A: An sanye shi da tacewa na layi, nozzles ba safai suke toshewa ba. Idan toshewar ya faru, cire bututun ƙarfe, kurkura shi da ruwa mai tsabta, ko kuma a hankali kwance ƙaramin rami tare da allura mai kyau.
6. Kammalawa
A Kit ɗin ban ruwa na micro sprayer shine kayan aikin lambu mai wayo don iyalai na zamani. Yana haɗa aikin ceton ruwa, shigarwa mara amfani da kayan aiki, dacewa mai ƙarfi, da lokacin shayarwa ta atomatik.
Ko kuna da ƙaramin baranda, lambun masu zaman kansu, ko lambun kayan lambu na gida, wannan kayan ban ruwa na duniya yana kiyaye tsire-tsire lafiya duk tsawon shekara, yana adana lokacinku mai daraja, kuma yana sa aikin lambun gida ya fi sauƙi, mai kore, da daɗi.
Shixia Holding Co., Ltd. an kafa shi a cikin 1978, yana da ma'aikata sama da 1,300 da fiye da 500 na injunan gyare-gyaren allura daban-daban, injunan gyare-gyare da sauran kayan aikin ci gaba.
