Knapsack sprayer parts thlak dan tur step by step hmanga kal theih a ni.

Knapsack sprayer parts te chu special skills awm lovin i thlak thei bawk. Hmanraw bulpui tlemte la la, tihfai dan tur ngaihtuah la, chu o-rings chu check fo rawh. I knapsack sprayer a leak emaw, pressure a hloh emaw a nih chuan, siamthat thuai chuan harsatna chu a chinfel sak fo thin. Maintenance zawm zel hian i knapsack chu a rei zawk a, sum a humhim bawk.

Tip: Tunah chuan fimkhur deuhin i sprayer chu i mamawh ber laiin a thawk thei tawh ang!

Key takeaways 1000 a ni.

• Hmang screwdriver , wrench, leh spare o-rings ang chi hmanraw awlsam tak tak te .In lama awlsam taka i knapsack sprayer siam that nan

• Check la, thlak leh rawh . A tlangpuiin nozzle , filter, hose, seal, leh O-ring te chu leak tihtawp nan leh pressure nghet taka awm theihna tur a ni.

• Gloves bun fo la, boruak thianghlim takah hna thawk la, i siam that hmain i sprayer kha tifai la, a him a, a chhiatna tur a awm loh nan.

• I hman zawh apiangin i sprayer chu tifai la, enfiah fo la, clogs, leak leh repairs man to tak tak a awm loh nan.

• I sprayer leh spare parts te chu hmun vawt leh lum takah label awmnaah dah la, rang takin an hmu ang a, engkim chu a tha taka dah vek rawh.

Hmanrua leh parts .

Hmanraw pawimawh tak tak .

I hnathawh theih nan chuan hmanraw man to tak tak i mamawh lo. Knapsack sprayer a ni a . Repair-ah chuan in lama i neih tawh ngei tur hmanrua an hmang mai thei. I toolbox-a i dah tur basics thenkhat chu hetiang hi a ni:

• Phillips leh Flathead screwdriver te pawh an awm nual.

• Allen Wrenches (hex Keys) .

• Wrench emaw pliers emaw adjustable .

• Brush te tak te tihfai nan .

• Spare O-Rings leh gasket te pawh a awm bawk.

Tip: I sprayer hmanrua leh spare parts atan chauh box emaw bag emaw te te dah la. Chutiang chuan i sprayer siamthat i mamawh hunah engkim i hmu rang thei ang.

Common Knapsack Sprayer Parts te pawh a awm bawk.

I knapsack sprayer-a thil pawimawh ber berte hriat hian harsatna i hmu rang thei hle. Part thenkhat chu a dang aiin a chhe rang zawk. Hengte hi i thlak ngai ber tur a ni:

Nozzle, filter leh seal te hi i thlak tam berna hmunpui ber a ni tih i hmu ang. Heng thilte nen hian repair kit i dah chuan harsatna tam zawk chu i siam tha nghal thei ang.

Hriselna atana hman dan tur .

I backpack sprayer-a hnathawh hunah himna dah hmasa phawt ang che. Hengte hi zawm tur dan awlsam tak tak te chu hetiang hi a ni:

• Chemical leh a sir hrual atanga i kut venna tur gloves bun thin ang che.

• Hmun tha takah hna thawk rawh.

• Repair i tan hmain knapsack chu silfai hmasa phawt ang che.

• Part chhia hmang ngai suh. A tharin thlak leh rawh.

• Sprayer i hman leh hmain part zawng zawng a fit vek tur chu double-check rawh.

Note: Check mumal tak leh siamthatna rang tak neih hian i Knapsack Sprayer chu a him a, hman theih turin a inpeih reng bawk.

Part dik lote hriatchhuah .

Spotting problems Early hian i sprayer siam that thuai a pui thin. Leak, pressure hloh emaw, odd spray pattern emaw i zawng thei bawk. Hetiang hian i ti thei ang . Knapsack sprayer parts ber ber te chu enfiah la , i hmanrua te chu a thawk tha thei ang bera awm tir rawh.

Nozzle chungchangah hian .

Nozzle hian i sprayer-in liquid a pek dan a control a. Spray inang lo emaw, pressure chak lo emaw i hmuh chuan nozzle chu a khar emaw, a chhe emaw thei a ni. Hetah hian i tih theih chu:

1. Nozzle chu la chhuakin bawlhhlawh emaw, bawlhhlawh emaw a awm leh awm loh enfiah rawh.

2. Nozzle chu tui leh brush te tak te hmangin silfai la.

3. Chemical i dah hmain filter emaw screen emaw hmang la, a chhunga thil awmte chu a luh loh nan.

4. I sprayer chu hmun thianghlim leh vawt takah dah la, leivut a chhuah loh nan.

Tip: Fainain spray a siam that loh chuan nozzle chu a tharin i thlak a ngai mai thei.

Hose leh dip tube lama harsatna awm thei te .

Hose leh dip tube te hian tank atanga nozzle thlengin liquid an phur a. Crack, leak emaw blockage emaw hian pressure hloh emaw leak emaw a thlen thei a ni. Harsatna i en theih dan tur chu hetiang hi a ni:

• Hose-ah hian hmuh theih crack emaw leak emaw zawng rawh.

• Trigger chu squeeze la, connection-ah tui tla tur chu en rawh.

• Hose leh dip tube chu la chhuakin clog awm leh awm loh enfiah rawh.

• Tape emaw glue emaw hmang lovin hose chhia chu thlak leh rawh.

Quick check hian a hnuah harsatna lian zawk lakah a chhanhim thei che a ni.

Pump, seals, leh O-ring te .

Pump hian pressure a siam a, seal leh o-ring te hian engkim a ti nghet vek a ni. Pump chhehvela leak emaw pressure hloh rang emaw i hmuh chuan heng parts te hi ngaihven a ngai mai thei. Heng step te hi han en ve teh:

1. Tank chu tuiin khat la, pump up rawh.

2. Pump bulah emaw, connection-ah emaw leak awm leh awm loh en rawh.

3. Leak i hmuh chuan screw caps kha tight rawh. Leak a awm chhunzawm zel chuan cap chu la chhuakin gasket leh O-ring te chu enfiah rawh.

4. Gasket chu flat-a thut leh twist a nih loh nan enfiah rawh.

5. O-rings chu a hmuna dah leh hmain lubricate hmasa phawt ang che.

Note: Gloves bun fo la, seal emaw gasket emaw i check emaw, i thlak hmain sprayer chu a khar ngei ngei tur a ni.

Check leh tihfai fo hian a pui che a ni . Spot a chhe tawh emaw, a chhe tawh emaw a ni . I gasket leh O-ring te chu a tha zawnga i dah chuan i sprayer chu a rei zawk ang a, a thawk tha zawk ang.

A thlakna tur step .

A inthlak chhuak . Knapsack sprayer parts hi a tricky hle mai thei a, mahse hmanrua tlemte leh dawhtheihna engemaw chen nen i ti thei ang. I thlak ngai mai tur main part tin chu i kal tlang ang u.

Nozzle thlak danglamna a awm bawk.

Nozzle khar emaw, a chhe tawh emaw chuan i spray pattern a tichhe thei a ni. Hetah hian i swap out theih dan tur chu hetiang hi a ni:

1. Untwist attachment eng pawh wand tawp atanga.

2. Handle emaw hose emaw atang chuan wand chu phelh rawh.

3. Wand thar chu handle emaw hose emaw-ah twist-in attached rawh.

4. I nozzle thar chu wand tawp lamah twist la.

Tip: Nozzle a fit em tih enfiah fo ang che. Leak i hmuh chuan spray hmain titawp la, tight la.

Hose leh dip tube thlak dan .

I hose emaw dip tube emaw a crack emaw a leak emaw chuan i thlak a ngai a ni. I hmanrua te chu khawl khawm hmasa rawh: Phillips leh Flathead screwdriver te, wrench pakhat te, leh pliers thenkhat te pawh a ni mai thei. Tui lum hian hose a ti nem thei a, fitting awlsam zawk a ni.

1. battery chu la chhuak rawh . I sprayer pakhat a awm chuan

2. Phillips screwdriver hmangin cover plate-a screw awmte chu tihzauh rawh.

3. Wrench hmangin hose connection-a nut te chu a lo chhuak a, a la chhuak bawk.

4. Hose collar twist off la, hose hlui chu pull off rawh.

5. Hose thar tawp chu tui lum ah second 10 vel dip rawh.

6. Hose nem tak chu pump barbs-ah chuan slide la, collar emaw hose clamp emaw hmangin nghet takin dah rawh.

7. Nut leh screw zawng zawng chu a hmuna awm vek turin tight vek rawh.

Note: Hose chu fitting-ah force ngai suh. Tui lum hmanga tih nem chuan hna a ti awlsam hle.

Pump leh seal swap .

I sprayer hian pressure a hloh emaw, a leak emaw chuan pump emaw seal emaw chu thlak a ngai mai thei. Safe swap tur chuan heng step te hi zawm tur a ni:

1. Battery chu la chhuak rawh.

2. Phillips screwdriver hmangin cover plate chu phelh rawh.

3. Pump barbs-a hose clamps chu flat-head screwdriver hmangin hlihsak rawh.

4. Zawi zawiin outlet hose chu pump atang chuan la chhuak rawh.

5. A tul chuan circuit board chu tape la chhuakin wire te chu disconnect hmangin detach rawh.

6. Pump chu tank-ah chuan screw-te chu phelh rawh.

7. Pump hlui chu jumper hose atang chuan wiggle la.

8. Pump thar chu step te chu reversing in attached rawh: Jumper hose chu connect la, wire te chu connect leh la, pump chu tank ah screw leh rawh.

9. Outlet hose chu tui lum takah nem la, chutah chuan pump barb-ah chuan slide la, clamp hmangin nghet takin dah rawh.

10. Hose clamp zawng zawng kha tight vek rawh.

11. Tui tlem tal dah la, battery chu dah la, sprayer chu on la, a leak leh leak loh enfiah rawh.

12. Leaks i hmuh chuan clamps te kha tight la.

Tip: Seal leh O-ring te chu a chhiat leh chhiat loh enfiah fo tur a ni. A chhe tawh emaw, a chhe tawh emaw a nih chuan thlak leh rawh.

Trigger emaw handle emaw fix .

Trigger emaw handle emaw chhe tawh chuan i sprayer chu a thawk thei lo thei. Hetiang hian i siam that theih dan tur chu:

1. Phillips screwdriver hmangin spray gun pawn lam housing chu phelh la, la chhuak rawh.

2. Wrench hmangin seal nut chu tihzauh la, chutah chuan kut hmangin la chhuak rawh.

3. Seal kit thar chu spring chu seal tawp te tak teah dahin seal nut-ah chuan slide-in dah khawm rawh.

4. Seal kit inzawmkhawm chu a hlui awmna trigger-ah dah rawh.

5. Seal nut chu kut hmangin khih la, chutah wrench hmangin tight rawh.

6. Housing chu bun leh la, screwdriver hmangin nghet takin dah rawh.

NOTE: Screwdriver leh wrench size dik tak hmang fo la, screw emaw nut emaw strip loh tur a ni.

Reassembly leh test .

Parts i thlak zawh hnuah engkim i dah khawm leh a ngai a, i hnathawh chu i test a ngai a ni. Hetah hian tih tur a awm:

1. Tank chhunga inlet filter atang chuan mesh screen holder chu la chhuak rawh.

2. Battery charged dah la, hose chu inlet filter barb ah connect rawh.

3. Sprayer chu sang takah dah la, pump chhungah tui luang lut rawh.

4. Tui a spray chhuah thlengin trigger chu squeeze la, chhuah tir rawh.

5. Inlet filter screen chu dah leh la, tank chhungah a hmai hnuai lam a awm ngei ngei tur a ni.

6. Nozzle leh filter zawng zawng chu soaking leh brush hmangin silfai vek tur a ni.

7. Hose, seal leh tank-ah te a leak emaw, a chhiat emaw a awm leh awm loh enfiah vek tur a ni.

8. Rubber parts te chu oil tlem te te in a flexible theih nan lubricate rawh.

9. Part zawng zawng chu reassemble la, engkim a inmil tawk tih enfiah rawh.

10. Test spray hmangin tui thianghlim hmangin ti rawh. Even flow leh spray angle dik tak en rawh.

Tip: Test spray hi skip ngai suh. Chemical i hman hmain leak emaw harsatna emaw i man theih nan a pui thin.

Heng siamthatna hmanrua neih chhung hian tihsual tlanglawn tak tak awm lohna tur table rang tak chu hetiang hi a ni:

Hriat tur: Fimkhur taka hnathawh leh check fo thin chuan i knapsack sprayer parts te chu a thawk rei zawk a, a him zawk bawk.

Backpack sprayer enkawl dan .

I backpack sprayer top shape-a dah chuan i hman apiangin result tha ber i hmu tihna a ni. Maintenance mumal tak neih hian clogs, leak, leh repairs man to tak tak a awm loh nan a pui thin. Routine awlsam tak tak, danglamna nasa tak thlen thei tur i lo en ang u.

Faina tih dan tur .

Backpack sprayer thianghlim tak chuan hna a thawk tha zawk a, a rei zawk bawk. I hman zawh apiangin i sprayer i tifai fo tur a ni. Hei hian chemical te a siam that loh nan a titawp a, nozzle leh hose te chu a tifai bawk. Hetah hian tihfai awlsamna checklist kan rawn tarlang e:

1. Hose, fittings leh filter te chu hman hma leh hman zawh apiangin enfiah thin ang che.

2. Tank chu empty la, chutah chuan a chanve vel chu tui thianghlim leh cleaning agent emaw neutralizer emaw hmangin khat rawh (a dik leh dik loh chu i chemical label en rawh).

3. Tank chhungah solution chu agitate la, chutah chuan pump leh nozzle hmangin tlan tir rawh.

4. Tank chu tui thianghlimin khat leh la, tui chauh a chhuah hma loh chuan system chu flush rawh.

5. Filter, screen leh nozzle te chu kut hmangin scrub la, a la awm chhun chu a chhuak thei ang.

Tip: Bleach emaw tui lum emaw hmang ngai suh. Chungte chuan i backpack sprayer a tichhe thei a, a nih loh leh reaction hlauhawm tak a thlen thei bawk.

Nitin i sprayer i hman chuan kar khatah vawi khat tal deep clean pe la. A tuk lama chemical ang chiah i hman chuan tank tihfai chu i skip thei a, mahse line chu tuiin i flush fo thin.

Enfiah fo thin .

I backpack sprayer chu hna thawh hma leh hna zawng zawng i check tur a ni. Crack, leak emaw, parts chhe tawh emaw zawng rawh. Nozzle, valve leh pipe te hi ngun takin ngaihven rawh. Nitin inspection hian harsatna i hmuh hma theih nan a pui che a, chutiang chuan a chhe zual hmain i siam that theih nan. Thla tin minute engemaw zat chhung chu nozzle te chu test la, filter te chu tifai emaw, thlak emaw la, a chhe lai te enfiah thin ang che. Engkim a kal tluang theih nan moving parts te chu lubricate rawh.

Note: Maintenance dik tak chuan i sprayer chu a thawk rei zawk a, hun rei tak chhungin pawisa a humhim thei bawk.

Spare parts dahkhawmna .

I backpack sprayer leh spare parts te chu a dik taka dah chuan chhiatna a veng thei. Engkim hi i dah hmain tifai la, a vawt vek tur a ni. I sprayer leh parts te chu hmun lum, vawt takah dah la, ni êng leh boruak lum lutuk atanga hla takah dah rawh. Leivut leh bawlhhlawh paih chhuah loh nan cover hmang ang che. Spare hose, nozzle, leh o-rings te chu labeled box-ah dah la, thil pakhat siamthat i mamawh hunah i hmu rang thei ang.

I backpack sprayer enkawl reng reng leh a dahna tur dik taka enkawl chuan harsatna chinfel nan hun i hmang tlem a, hna thawh zawh theihna hun tam zawk i hmang bawk.

Knapsack sprayer parts thlak danglam awlsamna tur step awlsam tak tak hmangin i sprayer chu a thawk thei reng a ni. Harsatna i hmuh hma chuan leak leh pressure hloh i titawp thei. Thil awm tlangpui leh a hmaa siam that dan hian a puih theih dan tur a awm thei:

Thil i siam that thuai theih nan leh hun khawhral loh nan extra parts te chu hnaih deuh deuhin dah thin ang che. I sprayer siam that hian sum a humhim a, boruak tan a tha zawk a, nangmah ngeiin siamthatna i tih theih ngei pawh a tichiang bawk!

FAQ a ni.

Knapsack sprayer-a nozzle hi engzat nge i thlak tur?

I nozzle chu a hman hnuah i check tur a ni. Clogs emaw uneven spray emaw i hmuh chuan swap out rawh. Mi tam zawk chuan season tin nozzle an thlak a, result tha ber an nei.

I sprayer hian pressure a hloh zel chuan engtin nge i tih ang?

A hmasa berin pump leh hose vel a leak awm leh awm loh enfiah hmasa phawt ang che. A loose parts awm zawng zawng chu tight rawh. Pressure i la hloh a nih chuan worn 1000 thlak leh rawh. O-rings emaw seal emaw . Pump chu tifai la, ti leh rawh.

I sprayer atan hian O-ring emaw seal emaw i hmang thei em?

I sprayer model atana siam o-ring leh seal te hmang fo ang che. A size dik lo chuan leak emaw chhiatna emaw a thlen thei. I manual kha check la, a nih loh leh a hlui chu dawrah match la, rawn keng la.

Engtin nge filter clogged chu i tihfai thin?

Filter chu sprayer atang chuan la chhuak rawh. Tui luang hnuaiah silfai rawh. Brush te tak te hmangin bawlhhlawh te chu scrub la. A dah leh hmain a vawt hmasa phawt ang che.

Khawiah nge i sprayer atan spare parts i dah ang?

Harsatna i siam that thuai theih nan i parts te chu dah khawm rawh!